For use with wire rope only, up to 1/2".
When used properly, this multi-purpose snatch block can double the pulling power of a winch and change the pulling direction without risk of damaging the rope. Snatch blocks also reduce amp draw and winch overheating. Applicable working load limit (WLL) is dependent on application: 4:1 Safety Factor WLL: 9,000lb - per ASME B30.26 Standard (General rigging & lifting); 2:1 Safety Factor WLL: 18,000lb - per BS 7901 Standard (Vehicle recovery, not overhead). Minimum breaking strength: 36,000lb. Max recommended winch capacity: 9,000lb.
  • Reduces heat build up and amp draw
  • Can double the pulling power of a winch
  • Change the pull direction without damaging rope
  • Verify the correct WLL based on your application: 9,000lb WLL for general rigging and lifting; 18,000lb WLL for vehicle recovery and non-overhead pulling. Max recommended winch capacity: 9,000lb
Attributes
ASIN B00029XECK
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Capacity 9,000, 18,000
Compatibility Winches With 12000 Pounds Capacity
Country of Origin (Primary) CN
Greasable Yes
Harmonized Tariff Code (Schedule B) 8425190000
Hazardous Material Code N
Includes Grease Port Yes
Life Cycle Status Code Available to Order
Maximum Line Diameter 3/8
NAFTA Preference Criterion Code B
Pulley Material Steel
SDR Required Flag N
Warranty Time 12
Weight Capacity (LB) 24000 Pounds
GTIN 00012748156406

Write a review.

Note: HTML is not translated.
    Bad           Good