The WARN 71550 9.0Rc winch is a compact, lightweight winch designed for competition events. Competitive rock crawling means tackling tough climbs, intense approach angles and tight turns. If you need a light-weight small footprint winch then the WARN 9.0Rc is the best choice. With a unique yet durable bright red paint job, 9,000lbs of pulling power and 50 feet of WARN synthetic rope - The WARN 9.0RC delivers maximum pulling power in a lightweight package!

  • 4.8 hp series wound motor delivers 9,000 lbs. of pulling capacity, and fast line speed under load
  • Next-generation control pack delivers long duty cycles
  • New-style remote control
  • 50' of 3/8" (15 m of 9.5 mm) diameter synthetic rope combined with a rugged, 360-degree swivel hook and thimble
  • Ballistic nylon sliding sleeve that provides extra rope protection against abrasion and wear
  • Aluminum hawse fairlead
  • Exclusive multi-segment cam actuated brake for positive operator control during winching
  • Gloss red paint with primer undercoat gives superior corrosion resistance
9.0Rc SPECS/PART NUMBER
Winch Model: WARN 9.0Rc
Part Number: 71550
Rated Line Pull: 9,000 lbs. (4080 kgs) single-line
Motor: Series Wound, 12V 4.8 hp
Electrical controls: Contactor
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear ratio: 216:1
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic mechanical cone brake
Drum diameter/Length: 2.75 in/4.75 in (7.0cm/12cm)
Weight: 54 lbs. (24.8kgs.)
Rope: 50 ft, 3/8 in (15m, 9.5mm) Synthetic Rope
Fairlead: Polished Aluminum Hawse
Recommended Battery: 650 CCA minimum for winching
Battery leads: 2 gauge, 72 in (1.83m)
Finish: Gloss red paint over primer undercoating

 

PERFORMANCE SPECIFICATIONS
Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 32 (9.75) 85 amps 1/9000 (4082)
2000 16 (4.88) 187 amps 2/7280 (3302)
4000 11.4 (3.47) 284 amps 3/6670 (3026)
6000 8.9 (2.71) 367 amps 4/6230 (2826)
8000 6.8 (2.07) 458 amps  
9000 5.6 (1.70) 408 amps  

 

 Above performance specs are based on first layer of drum

Winch Dimensions: 

16.8" L. x 6.3" D. x 7.6" H. (427mm L. x 160mm D. x 194mm H.)


Mounting Bolt Pattern: 

6" x 4.5" (151mm x 114.3mm)

Attributes
ASIN B000OV7MGK
Brake Type Mechanical Cone
California Proposition 65 Yes
Conforms To J706 Standards No
Country of Origin (Primary) US
Drive Gear Type Planetary
Electrical Control Type Contactors
Emission Code Legal US
Fairlead Type Hawse
Free Spooling Yes
GTIN 00012748715504
Gear Reduction Ratio 9.00069444444445
Harmonized Tariff Code (Schedule B) 8425110000
Hazardous Material Code N
Life Cycle Status Code Available to Order
Line Diameter (IN) 3/8 Inch
Line Length (FT) 50 Feet
Line Material Synthetic
Max Amp Draw/ Line Pull 408 Amp Draw/ 9000 Pound
Max Line Pull/ Line Speed 9000 Pound/ 5.6 Feet Per Minute
Motor Horsepower 4.8 Horsepower
Motor Type Series Wound
Mount Type Vehicle Mounted
NAFTA Preference Criterion Code B
Operation Type Automatic
Rated Single Line Pull (lbs.) 9000
Recommended Use Vehicle Recovery
SDR Required Flag N
Thermal Shutoff No
Type Electric
Voltage 12 Volt
WARNING CA Proposition 65 No
Warranty Time 12

Write a review.

Note: HTML is not translated.
    Bad           Good

WARN 9.0Rc Ultimate Performance Series Rock Crawling Winch - 71550

Vehicle Fitment

Fitment: Year Required

Product Information

  • Brand: WARN
  • Product Number: 71550
  • $1,746.99


The AAM Group™ Proposition 65
Proposition 65 warning graphic (For California Residents)
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov